• 
• • Model:SG1
  • Order Code:Z305101

  TiN coating / Dots mark 3, 6 and 9 mm from top of tip / Five teeth ; 0.6 mm thick

• 
• • Model:H-SG1
  • Order Code:Z305151

  TiN coating / Dots mark 3, 6 and 9 mm from top of tip / Five teeth ; 0.6 mm thick /
  Tips that correspond to high power can be used up to 150% power setting.
  SURG 150%

• 
• • Model:SG1A
  • Order Code:Z305138

  TiN coating / Dots mark 3, 6, 9, 12 and 15 mm from top of tip / Five teeth ; 0.6 mm thick

• 
• • Model:SG2R
  • Order Code:Z305102

  TiN coating / Right curved tip* / Three teeth ; 0.6 mm thick
  *The direction of the tip’s curve is defined by the tip’s anterior view.

• 
• • Model:SG2L
  • Order Code:Z305103

  TiN coating / Left curved tip* / Three teeth ; 0.6 mm thick
  *The direction of the tip’s curve is defined by the tip’s anterior view.

• 
• • Model:SG8
  • Order Code:Z305109

  TiN coating / Dots mark 3, 6 and 9 mm from top of tip / Three teeth ; 0.6 mm thick

• 
• • Model:H-SG8
  • Order Code:Z305155

  TiN coating / Dots mark 3, 6 and 9 mm from top of tip / Three teeth; 0.6 mm thick /
  Tips that correspond to high power can be used up to 150% power setting.
  SURG 150%

• 
• • Model:SG8A
  • Order Code:Z305139

  TiN coating / Dots mark 3, 6, 9, 12 and 15 mm from top of tip / Three teeth ; 0.6 mm thick

• 
• • Model:H-SG8R
  • Order Code:Z305156

  TiN coating / 90 degree right curved tip* / Three teeth ; 0.6 mm thick
  *The direction of the tip’s curve is defined by the tip’s anterior view.
  SURG 150%

• 
• • Model:H-SG8L
  • Order Code:Z305157

  TiN coating / 90 degree left curved tip* / Three teeth ; 0.6 mm thick
  *The direction of the tip’s curve is defined by the tip’s anterior view.
  SURG 150%

• 
• • Model:SG14R
  • Order Code:Z305122

  TiN coating / Right curved tip* / Five teeth; 0.6 mm thick
  *The direction of the tip’s curve is defined by the tip’s anterior view.

• 
• • Model:SG14L
  • Order Code:Z305123

  TiN coating / Left curved tip* / Five teeth; 0.6 mm thick
  *The direction of the tip’s curve is defined by the tip’s anterior view.

• 
• • Model:SG19
  • Order Code:Z305135

  TiN coating / Dot mark 3 mm from top of tip / Five teeth; 0.8 mm thick

• 
• • Model:SG30
  • Order Code:Z305137

  TiN coating / Sharp edge / 0.5 mm thick

• 
• • Model:SG58
  • Order Code:Z305141

  TiN coating / Dots mark 3, 6 and 9 mm from top of tip / Three teeth ; 0.6 mm thick

• 
• • Model:SG68
  • Order Code:Z305143

  TiN coating / Dots mark 2 and 4 mm from top of tip / Three teeth ; 0.6 mm thick
  
  
  

• 
• • Model:SCL1
  • Order Code:Z305170

  Internal irrigation

• 
• • Model:SCL1D
  • Order Code:Z305171

  Internal irrigation / Diamond coating

• 
• • Model:SCL2D
  • Order Code:Z305182

  Internal irrigation / Diamond coating

• 
• • Model:SCL3
  • Order Code:Z305172

  Internal irrigation

• 
• • Model:SCL3D
  • Order Code:Z305173

  Internal irrigation / Diamond coating

• 
• • Model:SCL4D
  • Order Code:Z305184

  Internal irrigation / Diamond coating

• 
• • Model:SCL5
  • Order Code:Z305174

  Internal irrigation

• 
• • Model:SCL5D
  • Order Code:Z305175

  Internal irrigation / Diamond coating

• 
• • Model:SG15A
  • Order Code:Z305124

  Diamond coating / Diameter of the tip end ; 0.7 mm

• 
• • Model:SG15B
  • Order Code:Z305125

  Diamond coating / Diameter of the tip end ; 1.3 mm

• 
• • Model:SG15C
  • Order Code:Z305126

  Diamond coating / Diameter of the tip end ; 0.9 mm

• 
• • Model:SG15D
  • Order Code:Z305127

  Diamond coating / Diameter of the tip end ; 1.3 mm

• 
• • Model:SG16A
  • Order Code:Z305128

  Diamond coating / Diameter ; 2.0 mm

• 
• • Model:SG16B
  • Order Code:Z305129

  Diamond coating / Diamete r; 2.6 mm

• 
• • Model:SG6D
  • Order Code:Z305107

  Diamond coating

• 
• • Model:SG7D
  • Order Code:Z305108

  Diamond coating

• 
• • Model:SG9
  • Order Code:Z305110

  Flat circular convex elevator / Angled at 90°

• 
• • Model:SG10
  • Order Code:Z305111

  Flat circular convex elevator / Angled at 135°

• 
• • Model:SG11
  • Order Code:Z305112

  Cone compressor

• 
• • Model:G1-S
  • Order Code:Z305113

• 
• • Model:P20-S
  • Order Code:Z305114

  Straight tip

• 
• • Model:P25R-S
  • Order Code:Z305115

  Right curved tip / *The direction of the tip's curve is defined by the tip's anterior view.

• 
• • Model:P25L-S
  • Order Code:Z305116

  Left curved tip / *The direction of the tip's curve is defined by the tip's anterior view.

V-Tip Holder

• 
• • Model:V10-S
  • Order Code:Z305117

  Includes E-Tip replacement wrench / Plastic Tip is not included

Tip

• 
• • Model:V-P10
  • Order Code:Y900184

  Pack of 3 / V10-S holder is not included

• 
• • Model:V-P11R
  • Order Code:Y1002165

  Right curved type* / Pack of 3 / V10-S holder is not included
  *The direction of the tip's curve is defined by the tip's anterior view.
  *V-P11R/L, V-P12 can be used only for VarioSurg3.

• 
• • Model:V-P11L
  • Order Code:Y1002166

  Left curved type* / Pack of 3 / V10-S holder is not included
  *The direction of the tip's curve is defined by the tip's anterior view.
  *V-P11R/L, V-P12 can be used only for VarioSurg3.

• 
• • Model:V-P12
  • Order Code:Y1002167

  Pack of 3 / V10-S holder is not included
  *V-P11R/L, V-P12 can be used only for VarioSurg3.

• 
• • Model:E30RD-S
  • Order Code:Z305118

  Diamond coating / For posterior teeth (right angled*)
  * The direction of the tip’s curve is defined by the tip’s anterior view.

• 
• • Model:E30LD-S
  • Order Code:Z305119

  Diamond coating / For posterior teeth (left angled*)
  * The direction of the tip’s curve is defined by the tip’s anterior view.

• 
• • Model:E31D-S
  • Order Code:Z305120

  Diamond coating / For anterior and posterior teeth (70°)

• 
• • Model:E32D-S
  • Order Code:Z305121

  Diamond coating / For anterior teeth (90°)